JST to USB proton power cable adapter for Hasbro Ghostbusters Afterlife Proton Pack
from $12.00
Sold Out
5 volt JST to USB wiring harness.
FOR INSTALLATION INSTRUCTIONS
copy and pate this link
rightcoastcreative.com/ghostbusters
This is a plug and play harness, designed to plug directly into the main board on your Hasbro proton pack and any 5 volt USB power bank. You will need to unplug the factory JST wiring connector from BAT1 on the main board for the D cell batteries and then plug this new harness in (see photos in listing). I recommend that this harness be used with the Talent Cell 3000mAh battery typically found on Amazon. The reason for this battery is it fits perfectly inside the Hasbro proton pack side compartment without much effort. See photos. USB to JST power cable is roughly 3 feet long. (Talentcell not included, Proton Pack not included).
----DISCLAIMER PLEASE READ----
Please note, you will need to take apart the proton pack. Some skill and mechanical knowledge of the pack is required.
I assume no responsibility for any possible damage during disassembly, during modifications or if parts are installed incorrectly.
Wiring harness was tested before shipping to ensure it functions properly.
FOR INSTALLATION INSTRUCTIONS
copy and pate this link
rightcoastcreative.com/ghostbusters
This is a plug and play harness, designed to plug directly into the main board on your Hasbro proton pack and any 5 volt USB power bank. You will need to unplug the factory JST wiring connector from BAT1 on the main board for the D cell batteries and then plug this new harness in (see photos in listing). I recommend that this harness be used with the Talent Cell 3000mAh battery typically found on Amazon. The reason for this battery is it fits perfectly inside the Hasbro proton pack side compartment without much effort. See photos. USB to JST power cable is roughly 3 feet long. (Talentcell not included, Proton Pack not included).
----DISCLAIMER PLEASE READ----
Please note, you will need to take apart the proton pack. Some skill and mechanical knowledge of the pack is required.
I assume no responsibility for any possible damage during disassembly, during modifications or if parts are installed incorrectly.
Wiring harness was tested before shipping to ensure it functions properly.
USB to JST:
5 volt JST to USB wiring harness.
FOR INSTALLATION INSTRUCTIONS
copy and pate this link
rightcoastcreative.com/ghostbusters
This is a plug and play harness, designed to plug directly into the main board on your Hasbro proton pack and any 5 volt USB power bank. You will need to unplug the factory JST wiring connector from BAT1 on the main board for the D cell batteries and then plug this new harness in (see photos in listing). I recommend that this harness be used with the Talent Cell 3000mAh battery typically found on Amazon. The reason for this battery is it fits perfectly inside the Hasbro proton pack side compartment without much effort. See photos. USB to JST power cable is roughly 3 feet long. (Talentcell not included, Proton Pack not included).
----DISCLAIMER PLEASE READ----
Please note, you will need to take apart the proton pack. Some skill and mechanical knowledge of the pack is required.
I assume no responsibility for any possible damage during disassembly, during modifications or if parts are installed incorrectly.
Wiring harness was tested before shipping to ensure it functions properly.
FOR INSTALLATION INSTRUCTIONS
copy and pate this link
rightcoastcreative.com/ghostbusters
This is a plug and play harness, designed to plug directly into the main board on your Hasbro proton pack and any 5 volt USB power bank. You will need to unplug the factory JST wiring connector from BAT1 on the main board for the D cell batteries and then plug this new harness in (see photos in listing). I recommend that this harness be used with the Talent Cell 3000mAh battery typically found on Amazon. The reason for this battery is it fits perfectly inside the Hasbro proton pack side compartment without much effort. See photos. USB to JST power cable is roughly 3 feet long. (Talentcell not included, Proton Pack not included).
----DISCLAIMER PLEASE READ----
Please note, you will need to take apart the proton pack. Some skill and mechanical knowledge of the pack is required.
I assume no responsibility for any possible damage during disassembly, during modifications or if parts are installed incorrectly.
Wiring harness was tested before shipping to ensure it functions properly.
5 volt JST to USB wiring harness.
FOR INSTALLATION INSTRUCTIONS
copy and pate this link
rightcoastcreative.com/ghostbusters
This is a plug and play harness, designed to plug directly into the main board on your Hasbro proton pack and any 5 volt USB power bank. You will need to unplug the factory JST wiring connector from BAT1 on the main board for the D cell batteries and then plug this new harness in (see photos in listing). I recommend that this harness be used with the Talent Cell 3000mAh battery typically found on Amazon. The reason for this battery is it fits perfectly inside the Hasbro proton pack side compartment without much effort. See photos. USB to JST power cable is roughly 3 feet long. (Talentcell not included, Proton Pack not included).
----DISCLAIMER PLEASE READ----
Please note, you will need to take apart the proton pack. Some skill and mechanical knowledge of the pack is required.
I assume no responsibility for any possible damage during disassembly, during modifications or if parts are installed incorrectly.
Wiring harness was tested before shipping to ensure it functions properly.
FOR INSTALLATION INSTRUCTIONS
copy and pate this link
rightcoastcreative.com/ghostbusters
This is a plug and play harness, designed to plug directly into the main board on your Hasbro proton pack and any 5 volt USB power bank. You will need to unplug the factory JST wiring connector from BAT1 on the main board for the D cell batteries and then plug this new harness in (see photos in listing). I recommend that this harness be used with the Talent Cell 3000mAh battery typically found on Amazon. The reason for this battery is it fits perfectly inside the Hasbro proton pack side compartment without much effort. See photos. USB to JST power cable is roughly 3 feet long. (Talentcell not included, Proton Pack not included).
----DISCLAIMER PLEASE READ----
Please note, you will need to take apart the proton pack. Some skill and mechanical knowledge of the pack is required.
I assume no responsibility for any possible damage during disassembly, during modifications or if parts are installed incorrectly.
Wiring harness was tested before shipping to ensure it functions properly.
