Haslab Universal Speaker 2.5" or 3" Enclosure Upgrade for Proton Pack (REDESIGNED!)
from $10.00
Sold Out
REDESIGNED! To be a truly universal speaker mount for your Ghostbuster Haslab Proton pack.
Upgrade your proton pack from the stock speaker to a louder speaker. Either 2.5" OR 3" depending in your preference.
Universal means it works with both round and square speakers of different brands. Compatible with the following speakers below. Just remember to get the correct size housing for your speakers size, either 2.5" or 3"
Dayton Audio PC83-8 3". https://amzn.to/3QmFHMy
Dayton Audio DS90-8 3". https://amzn.to/40ndVUy
Generic 3" Speaker. https://amzn.to/3Qq87GU
Dayton Audio PC68-8 2-1/2". https://amzn.to/3FL97yM
You will need to perform some modifications to your pack to make this mod work, including cutting and splicing wiring from the factory speaker, so some mechanical knowledge is required to perform this mod. You may also need to sand the sides of this speaker enclosure to fit inside your proton pack, clearances do very from pack to pack and part to part.
Colors of the speaker housing will vary depending on what color PLA is currently in my printer, currently I will be shipping either white or black
I assume no liability for any damage to your pack for modifications you perform.
I did not design this file, just modified it to fit the currant needs of available speakers. Original design came from Beelzebot's file on Thingiverse. You can find the file below for reference and proper credit.
https://www.thingiverse.com/thing:5866066
Upgrade your proton pack from the stock speaker to a louder speaker. Either 2.5" OR 3" depending in your preference.
Universal means it works with both round and square speakers of different brands. Compatible with the following speakers below. Just remember to get the correct size housing for your speakers size, either 2.5" or 3"
Dayton Audio PC83-8 3". https://amzn.to/3QmFHMy
Dayton Audio DS90-8 3". https://amzn.to/40ndVUy
Generic 3" Speaker. https://amzn.to/3Qq87GU
Dayton Audio PC68-8 2-1/2". https://amzn.to/3FL97yM
You will need to perform some modifications to your pack to make this mod work, including cutting and splicing wiring from the factory speaker, so some mechanical knowledge is required to perform this mod. You may also need to sand the sides of this speaker enclosure to fit inside your proton pack, clearances do very from pack to pack and part to part.
Colors of the speaker housing will vary depending on what color PLA is currently in my printer, currently I will be shipping either white or black
I assume no liability for any damage to your pack for modifications you perform.
I did not design this file, just modified it to fit the currant needs of available speakers. Original design came from Beelzebot's file on Thingiverse. You can find the file below for reference and proper credit.
https://www.thingiverse.com/thing:5866066
Speaker Size:
REDESIGNED! To be a truly universal speaker mount for your Ghostbuster Haslab Proton pack.
Upgrade your proton pack from the stock speaker to a louder speaker. Either 2.5" OR 3" depending in your preference.
Universal means it works with both round and square speakers of different brands. Compatible with the following speakers below. Just remember to get the correct size housing for your speakers size, either 2.5" or 3"
Dayton Audio PC83-8 3". https://amzn.to/3QmFHMy
Dayton Audio DS90-8 3". https://amzn.to/40ndVUy
Generic 3" Speaker. https://amzn.to/3Qq87GU
Dayton Audio PC68-8 2-1/2". https://amzn.to/3FL97yM
You will need to perform some modifications to your pack to make this mod work, including cutting and splicing wiring from the factory speaker, so some mechanical knowledge is required to perform this mod. You may also need to sand the sides of this speaker enclosure to fit inside your proton pack, clearances do very from pack to pack and part to part.
Colors of the speaker housing will vary depending on what color PLA is currently in my printer, currently I will be shipping either white or black
I assume no liability for any damage to your pack for modifications you perform.
I did not design this file, just modified it to fit the currant needs of available speakers. Original design came from Beelzebot's file on Thingiverse. You can find the file below for reference and proper credit.
https://www.thingiverse.com/thing:5866066
Upgrade your proton pack from the stock speaker to a louder speaker. Either 2.5" OR 3" depending in your preference.
Universal means it works with both round and square speakers of different brands. Compatible with the following speakers below. Just remember to get the correct size housing for your speakers size, either 2.5" or 3"
Dayton Audio PC83-8 3". https://amzn.to/3QmFHMy
Dayton Audio DS90-8 3". https://amzn.to/40ndVUy
Generic 3" Speaker. https://amzn.to/3Qq87GU
Dayton Audio PC68-8 2-1/2". https://amzn.to/3FL97yM
You will need to perform some modifications to your pack to make this mod work, including cutting and splicing wiring from the factory speaker, so some mechanical knowledge is required to perform this mod. You may also need to sand the sides of this speaker enclosure to fit inside your proton pack, clearances do very from pack to pack and part to part.
Colors of the speaker housing will vary depending on what color PLA is currently in my printer, currently I will be shipping either white or black
I assume no liability for any damage to your pack for modifications you perform.
I did not design this file, just modified it to fit the currant needs of available speakers. Original design came from Beelzebot's file on Thingiverse. You can find the file below for reference and proper credit.
https://www.thingiverse.com/thing:5866066
REDESIGNED! To be a truly universal speaker mount for your Ghostbuster Haslab Proton pack.
Upgrade your proton pack from the stock speaker to a louder speaker. Either 2.5" OR 3" depending in your preference.
Universal means it works with both round and square speakers of different brands. Compatible with the following speakers below. Just remember to get the correct size housing for your speakers size, either 2.5" or 3"
Dayton Audio PC83-8 3". https://amzn.to/3QmFHMy
Dayton Audio DS90-8 3". https://amzn.to/40ndVUy
Generic 3" Speaker. https://amzn.to/3Qq87GU
Dayton Audio PC68-8 2-1/2". https://amzn.to/3FL97yM
You will need to perform some modifications to your pack to make this mod work, including cutting and splicing wiring from the factory speaker, so some mechanical knowledge is required to perform this mod. You may also need to sand the sides of this speaker enclosure to fit inside your proton pack, clearances do very from pack to pack and part to part.
Colors of the speaker housing will vary depending on what color PLA is currently in my printer, currently I will be shipping either white or black
I assume no liability for any damage to your pack for modifications you perform.
I did not design this file, just modified it to fit the currant needs of available speakers. Original design came from Beelzebot's file on Thingiverse. You can find the file below for reference and proper credit.
https://www.thingiverse.com/thing:5866066
Upgrade your proton pack from the stock speaker to a louder speaker. Either 2.5" OR 3" depending in your preference.
Universal means it works with both round and square speakers of different brands. Compatible with the following speakers below. Just remember to get the correct size housing for your speakers size, either 2.5" or 3"
Dayton Audio PC83-8 3". https://amzn.to/3QmFHMy
Dayton Audio DS90-8 3". https://amzn.to/40ndVUy
Generic 3" Speaker. https://amzn.to/3Qq87GU
Dayton Audio PC68-8 2-1/2". https://amzn.to/3FL97yM
You will need to perform some modifications to your pack to make this mod work, including cutting and splicing wiring from the factory speaker, so some mechanical knowledge is required to perform this mod. You may also need to sand the sides of this speaker enclosure to fit inside your proton pack, clearances do very from pack to pack and part to part.
Colors of the speaker housing will vary depending on what color PLA is currently in my printer, currently I will be shipping either white or black
I assume no liability for any damage to your pack for modifications you perform.
I did not design this file, just modified it to fit the currant needs of available speakers. Original design came from Beelzebot's file on Thingiverse. You can find the file below for reference and proper credit.
https://www.thingiverse.com/thing:5866066
