Ghostbusters Haslab Proton Pack Easy Cyclotron LED Cake Mod
from $5.00
Sold Out
There are two options that are available for this cake mod upgrade. For either the stock Haslab circuit board or for the NinjaTunes Haslab replacement board. This is a plug an play kit for either circuit board your pack has.
Please view the instructions here for installation. https://rightcoastcreative.com/s/Ghostbusters-Haslab-Proton-Pack-Cake-Mod-Upgrade.pdf
This LED kit is wired to bypass the cyclotron alarm and allows the pack to run when the cyclotron lid is removed. (For stock Haslab packs).
This kit comes with the cyclotron leds wired ready to use based upon your selected pack. The kit also comes with 12, 3M light holders with zips ties to secure into your pack. (see photos).
You should wire the LED’s in the cyclotron cake starting at the connector end and go clockwise.
Please note, you will need to take apart the proton pack in order to replace the factory plastic frosted white lens for the blue acrylic lens and battery installation modifications. Some skill and mechanical knowledge of the pack is required.
I assume no responsibility for any possible damage during disassembly, during modifications or if parts are installed incorrectly.
Wiring harness was tested before shipping to ensure it functions properly.
This kit does not come with the cake itself, you must use and modify your packs original parts.
Reviews
Please view the instructions here for installation. https://rightcoastcreative.com/s/Ghostbusters-Haslab-Proton-Pack-Cake-Mod-Upgrade.pdf
This LED kit is wired to bypass the cyclotron alarm and allows the pack to run when the cyclotron lid is removed. (For stock Haslab packs).
This kit comes with the cyclotron leds wired ready to use based upon your selected pack. The kit also comes with 12, 3M light holders with zips ties to secure into your pack. (see photos).
You should wire the LED’s in the cyclotron cake starting at the connector end and go clockwise.
Please note, you will need to take apart the proton pack in order to replace the factory plastic frosted white lens for the blue acrylic lens and battery installation modifications. Some skill and mechanical knowledge of the pack is required.
I assume no responsibility for any possible damage during disassembly, during modifications or if parts are installed incorrectly.
Wiring harness was tested before shipping to ensure it functions properly.
This kit does not come with the cake itself, you must use and modify your packs original parts.
Reviews
Type:
There are two options that are available for this cake mod upgrade. For either the stock Haslab circuit board or for the NinjaTunes Haslab replacement board. This is a plug an play kit for either circuit board your pack has.
Please view the instructions here for installation. https://rightcoastcreative.com/s/Ghostbusters-Haslab-Proton-Pack-Cake-Mod-Upgrade.pdf
This LED kit is wired to bypass the cyclotron alarm and allows the pack to run when the cyclotron lid is removed. (For stock Haslab packs).
This kit comes with the cyclotron leds wired ready to use based upon your selected pack. The kit also comes with 12, 3M light holders with zips ties to secure into your pack. (see photos).
You should wire the LED’s in the cyclotron cake starting at the connector end and go clockwise.
Please note, you will need to take apart the proton pack in order to replace the factory plastic frosted white lens for the blue acrylic lens and battery installation modifications. Some skill and mechanical knowledge of the pack is required.
I assume no responsibility for any possible damage during disassembly, during modifications or if parts are installed incorrectly.
Wiring harness was tested before shipping to ensure it functions properly.
This kit does not come with the cake itself, you must use and modify your packs original parts.
Reviews
Please view the instructions here for installation. https://rightcoastcreative.com/s/Ghostbusters-Haslab-Proton-Pack-Cake-Mod-Upgrade.pdf
This LED kit is wired to bypass the cyclotron alarm and allows the pack to run when the cyclotron lid is removed. (For stock Haslab packs).
This kit comes with the cyclotron leds wired ready to use based upon your selected pack. The kit also comes with 12, 3M light holders with zips ties to secure into your pack. (see photos).
You should wire the LED’s in the cyclotron cake starting at the connector end and go clockwise.
Please note, you will need to take apart the proton pack in order to replace the factory plastic frosted white lens for the blue acrylic lens and battery installation modifications. Some skill and mechanical knowledge of the pack is required.
I assume no responsibility for any possible damage during disassembly, during modifications or if parts are installed incorrectly.
Wiring harness was tested before shipping to ensure it functions properly.
This kit does not come with the cake itself, you must use and modify your packs original parts.
Reviews
There are two options that are available for this cake mod upgrade. For either the stock Haslab circuit board or for the NinjaTunes Haslab replacement board. This is a plug an play kit for either circuit board your pack has.
Please view the instructions here for installation. https://rightcoastcreative.com/s/Ghostbusters-Haslab-Proton-Pack-Cake-Mod-Upgrade.pdf
This LED kit is wired to bypass the cyclotron alarm and allows the pack to run when the cyclotron lid is removed. (For stock Haslab packs).
This kit comes with the cyclotron leds wired ready to use based upon your selected pack. The kit also comes with 12, 3M light holders with zips ties to secure into your pack. (see photos).
You should wire the LED’s in the cyclotron cake starting at the connector end and go clockwise.
Please note, you will need to take apart the proton pack in order to replace the factory plastic frosted white lens for the blue acrylic lens and battery installation modifications. Some skill and mechanical knowledge of the pack is required.
I assume no responsibility for any possible damage during disassembly, during modifications or if parts are installed incorrectly.
Wiring harness was tested before shipping to ensure it functions properly.
This kit does not come with the cake itself, you must use and modify your packs original parts.
Reviews
Please view the instructions here for installation. https://rightcoastcreative.com/s/Ghostbusters-Haslab-Proton-Pack-Cake-Mod-Upgrade.pdf
This LED kit is wired to bypass the cyclotron alarm and allows the pack to run when the cyclotron lid is removed. (For stock Haslab packs).
This kit comes with the cyclotron leds wired ready to use based upon your selected pack. The kit also comes with 12, 3M light holders with zips ties to secure into your pack. (see photos).
You should wire the LED’s in the cyclotron cake starting at the connector end and go clockwise.
Please note, you will need to take apart the proton pack in order to replace the factory plastic frosted white lens for the blue acrylic lens and battery installation modifications. Some skill and mechanical knowledge of the pack is required.
I assume no responsibility for any possible damage during disassembly, during modifications or if parts are installed incorrectly.
Wiring harness was tested before shipping to ensure it functions properly.
This kit does not come with the cake itself, you must use and modify your packs original parts.
Reviews
